描画装置利用者の皆様へ
描画装置の停止期間のお知らせ
2月13日(火)~2月23日(金)の期間、電子描画装置メンテナンス(電子銃交換交換作業)のため電子描画装置は利用出来ません。
皆様にはご迷惑をおかけ致しますが、ご協力をよろしくお願い致します。
Reserch Institute of Electronics Clean Room
描画装置利用者の皆様へ
描画装置の停止期間のお知らせ
2月13日(火)~2月23日(金)の期間、電子描画装置メンテナンス(電子銃交換交換作業)のため電子描画装置は利用出来ません。
皆様にはご迷惑をおかけ致しますが、ご協力をよろしくお願い致します。
・電子線描画装置
・FE-SEM
・電気炉
・スピンコーター
・アライナー
・RIE
・ECRスパッタ
・窒素ガン
新しいガスボンベが届き次第復旧作業を致します。
【14:16追記】
電子工学研究所のN2ガス供給が再開しました。上記装置も稼働致します。
FE-SEMは真空ポンプが長時間停止した影響で、正常な真空度に到達するまで時間がかかります。
再開までしばらくお待ちください。
【16:50追記】
SEM再開しています。
・Electron Beam Lithography System
・FE-SEM
・Electric Furnace
・Spin Coater
・Mask Aligner
・RIE
・ECR Sputter
・Nitrogen gun
We will restore them as soon as a new gas cylinder arrives.
【Added at 14:16】
The supply of N2 gas at the Research Institute of Electronics resumed. The above devices will also be restarted.
Regarding FE-SEM, the vacuum pump has been stopped for a long time, so it takes time to reach the normal degree of vacuum.
Please wait for a while until restarting.
【Added at 16:50】
SEM has been restarted.
日にち:2018年1月23日(火)
時間 :9:00~13:30(予定)
Date:Tuesday, January 23, 2018
Time:9:00~13:30 (plan)
使用記録簿の情報は装置トラブル時の対処や、装置使用料金の算出に使う重要なものです。
授業や研究で忙しい時期かと思いますが、ルールを守りみんなで気持ちよく実験室を使いましょう。
The information in the use register is important for coping with troubles of the equipment and for calculating the equipment usage fee.
We think that everyone is busy with classes and research, but let’s keep rules and use the laboratory comfortably.
◆10月19日(木)
RPオイルとDPオイルの交換が完了しました。
これから一晩かけてDP内部の真空引きをします。
順調にDPが回復すれば明日午後には使用再開する予定です。
◆10月20日(金)
真空引きテストが終了しました。
真空引き開始から30分で4.2×10-4Paまで到達しました。
蒸着装置は問題なく使用できます。
※※※ おねがい ※※※
今回の装置トラブルの原因はRPオイルがDP内部まで逆流したことのようです。
装置使用後にRPを切る際はRPリークバルブを開ける操作を忘れずに行ってください。
また、「オイルを逆流させてしまった」「装置を壊してしまった」等の自覚がある方へ。
トラブルが起きたらすぐに職員まで知らせてください。
トラブルを放置されるのが一番困ります。
よろしくお願い致します。
◆October 19, Thursday
Oil change completed.
We will vacuum the inside of the DP overnight.
If DP recovers steadily, we plan to resume use tomorrow afternoon.
◆October 20, Friday
The vacuuming test is over.
It reached 4.2 × 10 -4 Pa in 30 minutes from the start of evacuation.
Vacuum Coater can be used normally.
※※※ NOTICE ※※※
This trouble seems to be caused by the RP oil flowing back to the inside of the DP.
Please do not forget to open the RP leak valve when turning off the RP after using the equipment.
In addition, to those with the awareness “I caused the equipment trouble.”
Please inform to staff as soon as the trouble occurs.
The most troubling thing for us is to hide the occurrence of trouble.
Thank you for your attention to this matter.
電気炉Bの窒素電磁弁が故障したため、電気炉Bは停止しています。
使用再開のめどがたち次第お知らせいたします。
【9/7追記】
9/28に修理業者が来ます。
【9/28追記】
電気炉B再開しました。
Electric furnace B is disabled because the nitrogen solenoid valve has failed.
We will inform you as soon as we can resume our use.
【Add on September 7】
Repairer will come on September 28.
【Add on September 28】
Electric furnace B restarted.
9/20 9:00
SEM使用再開しました。
September 20, 9:00
The use resumed.
9/14 8:00
SEM使用再開しました。
September 14, 8:00
The use resumed.
電研クリーンルーム利用者の皆様
8月26日(土)~8月27日(日)、は城北キャンパスが施設点検のため、停電となります。
このため、クリーンルームは、8月25(金)16:00~8月28日(月)13:30の期間、停止します。
皆様にはご迷惑をおかけ致しますが、ご協力をお願い致します。
Everybody of the clean room user
It’ll be a blackout because Johoku campus is check of facilities on Saturday, August 26-on Sunday, August 27.
Therefore I do closing of facilities of a clean room in 16:00 on 25 Friday in August.
It resumes from 13:30 on Monday, August 28.
Please cooperate.